FAQ
HomeServiceFAQ

Common Fault and Solutions for Aquatic Feed Extruders

2020-08-20

We have four types of aquatic feed extruders for you to choose:

1.DSP fish food pellet extruder machine,capacity 3-4t/h,main power: 132kw

2.Dry type small fish feed extruder machine,capacity : 150kg/h,main power: 15kw

3.Wet type fish fodder mill extruder,capacity : 1-1.2t/h,main power: 75kw

4.Floating fish feed extruder machine,capacity : 2t/h,main power: 132kw

These extruders can be used in various aquatic feed processing production lines and pet extruded feed production line, you can browse Fish Feed Pellet Production Line, Shrimp Feed Pellet Production Line, Carb Feed Pellet Production Line.Welcome to directly consult Richi Machinery for details.

mini fish feed floating extruder machine

Trouble Cause Solution
1.No material discharging when adding soybeans 1. Too narrow the gap between the inside cone of the outlet die and the outside cone of the cone shaft.
2. Too much material is put in within short time.
1. Press the outlet die and the cone shaft and back screw for 3-4 turns.
2. Reduce the feeding speed.
2.Too course or too the big extruded soybean Too big gap between the inside cone of the outlet die and the outside cone of the cone shaft.  Adjust as the above solution or replace it with a small hole die.
3.Temperature in the extruding chamber fails to reach the standard 1. Too small diameter of the resistance ring or the resistance ring is worn out.
2. Not adding steam or the steam quality is low.
1. Replace a new resistance ring.
2. Open the steam valve or check the steam pipeline.
4. Capacity decreases Resistance ring is worn out. Replace
5. No output during normal operation 1. Too much material is put in within short time.
2.  Outlet die is blocked by metal or hard material.
Stop the machine and remove blockage.
6. The diameter of the pellet is too long. The outlet die hole is worn out. Change the die.
7. The diameter of the pellet is too short. The outlet die hole is too small. Change the die.
8. The pellet is too long or too short. The speed of the cutter is not well adjusted.  Readjust the cutter.
9. Material splashing during feeding Too fast feeding in material or not smooth feeding or blockage happened. 1. Control the feeding speed.
2. If blocked, do as 5.
Products Recommended
Feed Hammer Mill
Feed Hammer Mill Capacity : 10-13T/H
Power : 110KW
Bucket Elevator
Bucket Elevator Capacity : 60m³
Power : 5.5KW
Sawdust Pellet Mill
Sawdust Pellet Mill Capacity : 2.5-4T/H
Power : 250KW
Pellet Cleaning Sieve
Pellet Cleaning Sieve Capacity : 15-30T/H
Power : 0.75KW
Success Stories
The 3-5T/H feed pellet machine in Qatar
The 3-5T/H feed pellet machine in Qatar Country : Qatar
Capacity: 3-5T/H
The 3-5T/H animal mash feed line In Malaysia
The 3-5T/H animal mash feed line In Malaysia Country : Malaysia
Capacity: 3-5T/H
1-2T/H Chicken Feed Pellet Production Plant In Papua New Guinea
1-2T/H Chicken Feed Pellet Production Plant In Papua New Guinea Country : Papua New Guinea
Capacity: 1-2T/H
The 100-150kg/h Floating fish feed line In Botswana
The 100-150kg/h Floating fish feed line In Botswana Country : Botswana
Capacity: 100-150kg/hour
Packaging And Transport Quality Test Before Delivery Check Items When Packing After-sale Service
Get An Instant Quotation

For all inquiries fill in the form below to send us a brief message,and we will get back to you as soon as possible.

Product:
* Email:
Tel:
* Name: