RICHI E-mail
Media Center
FAQ
HomeServiceFAQ

What factors causing low output of feed pellet mill?

2019-12-23 Back to List

If you are looking for related products or have any other questions, please feel free to contact us.

Contact Us

Pellet milling is the most commonly used processing equipment in feed factories. Its output directly determines the production efficiency and productivity of feed factories. There are many factors affecting the output of feed processing equipment. In addition to equipment assembly, debugging, or maintenance in the operation process, there are mainly the following aspects.View all pellet machine products:www.cn-pellet.com/product/feed-pellet-machine/

pellet machine animal feed

1. Ring die

The horn mouth of ring die surface is calendered, it need re-chamfer.

Improper selection of ring die compression ratio. The suitable compression ratio: livestock and poultry feed 9-13, fish feed 12-15, shrimp feed 20-25, heat-sensitive feed 5-9, forage grass and straw feed 6-9. The die hole is blocked. Clout the blocked hole from the outside to the inside of the ring die to remove impurities. The low opening rate of ring die leads to low output.

2. Roller

The roller shell is worn out and needs to be replaced in time.

The combination of new ring die and old roller, new roller and old ring die may result in low output. A new ring die with a new roller shell should be used for pelleting so that the contact clearance between roller and ring die is consistent to achieve uniform wear.

3. Conditioner blade

Blade wear may affect material conditioning, causing poor effect of material mixing and steam absorption. Material softening of conditioner is bad, affecting the particle pulverization rate and output.

4. Conditioning temperature

If the conditioning temperature is too low, the reasonable temperature should be controlled at: livestock and poultry feed 70-88℃; fish feed 82-95℃; shrimp feed 90-105℃; heat-sensitive feed 45-69℃.

5.Steam quality

The steam pressure of cylinder should be more than 0.6 Mpa, the steam pressure after decompression should be 0.1-0.3 Mpa, and the trap should work normally to ensure that the steam is saturated steam without condensation water.

How to solve the problem of low output of pellet machine?Which kind of feed pellet mill equipment can ensure high output?Welcome to consult Richi machinery online or by email!

Send Your Inquery

TEL: +86 18574103366 E-mail: enquiry@cn-pellet.com
Products Recommended
Fuel Pellet Making Machine
Fuel Pellet Making Machine Capacity : 1-1.2T/H
Power : 90KW
Stainless Steel Feed Mixer
Stainless Steel Feed Mixer Capacity : 1000KG/BATCH
Power : 22KW
Animal Feed Mixing Machine
Animal Feed Mixing Machine Capacity : 2000KG/BATCH
Power : 30KW
Feed Hammer Mill
Feed Hammer Mill Capacity : 10-13T/H
Power : 110KW
Success Stories
Large capacity 28t/h miscellaneous wood rice husk pellet production plant project
Large capacity 28t/h miscellaneous wood rice husk pellet production plant project Country : Anhui Province, China
Capacity: 28T/H
China turnkey 16t/h commercial livestock animal compound feed processing plant project for pig and c
China turnkey 16t/h commercial livestock animal compound feed processing plant project for pig and c Country : China
Capacity: 16T/H
The 1-1.5T/H Fish Feed Line + 2TPH Chicken Feed Pellet Line In Uzbekistan
The 1-1.5T/H Fish Feed Line + 2TPH Chicken Feed Pellet Line In Uzbekistan Country : Uzbekistan
Capacity: 1-1.5T/H
The 1-2T/H Animal Feed Pellet Line In Malawi
The 1-2T/H Animal Feed Pellet Line In Malawi Country : Malawi
Capacity: 1-2T/H
×
Fill In The Form To Get Quotation
Packaging And Transport Quality Test Before Delivery Check Items When Packing After-sale Service
Get An Instant Quotation
Consuly online customer service →

For all inquiries fill in the form below to send us a brief message,and we will get back to you as soon as possible.

whatsapp